From the left navigation bar, click on the gear icon at the bottom
Choose the organization level
Choose Schedules on the top navigation bar
Choose Scheduling Configurations
Max Shift Duration
Set the number of hours that the scheduled shift can be at most. This is to prevent accidents where a manager may have meant to put, for example, 4pm but accidentally put 4am, which created a shift of over 20hrs. In this event, if the threshold was set to 24hrs, then the shift would be saved and posted to the employee.
An update to this field to 10hrs (or whatever would likely be your max shift duration) would then prevent the manager from saving the accidental shift, as mentioned above.
Allow shift to overlap unavailability
When enabled, shifts may be scheduled over employee unavailability. When creating a manual shift, the manager will be presented with a 'soft warning' that will pop-up indicating that the employee does not have availability during this shift time, but will allow them to save the shift anyway.
It is important to try to encourage updates to employee data such as availability, especially when using the Automated Optimized Scheduler (AOS).
When this configuration is disabled, managers will not be able to save a shift that overlaps an employees unavailability as a 'hard stop' warning will be presented. The manager will have to update the shift or assign to a different employee who is available during that time
This configuration exists at both the Business Settings and Location Settings. For example, across the business this can be allowed, however, a manager at one particular location does not do a good job ensuring availabilities are updated and has a few issues with scheduling employees outside availability. In this scenario, you would enable for the business, but disable for the single location to encourage updates on availabilities to be entered.
NOTE: Whether this configuration is enabled or disabled, it will not impact the Automated Optimized Schedules (AOS). AOS will generate schedules within employee's availability.
Default to Role Rate
When enabled, the Role Rate will be used for unassigned shifts.
Allow shift to overlap time off requests
When enabled, shifts can be scheduled over employee time off requests. When an employee has submitted a time off request and the manager has approved it, the manager would still be able to schedule a shift during this period (if enabled).
When disabled, if an employee has an approved time off request from a manager, they will not be able to be scheduled during that time.
An employee who has a PENDING Time Off Request (it has not been approved by a manager) can still be scheduled at that time whether this configuration is enabled or disabled. This is seen as available time, as it has not been approved yet and the manager and AOS will schedule over pending time off requests.
It is important that managers approve (or decline) where time off requests are being submitted, not only to create positive culture and keeping the employees informed, but to ensure proper scheduling.
Mark Shift as Absent
When enabled, managers can mark shifts as absent from the Timekeeping screen. When reviewing why an employee did not punch in for a shift, this setting will allow managers to select 'Mark As Absent' and then proceed to select a reason from a drop-down list.
An example would be that an employee was a 'No Call, No Show'. With this setting enabled, the manager would navigate to the empty time punch (in Timekeeping) and mark them employee as absent and select the No Call, No Show option in the drop down. This would then be part of further reporting on absenteeism that exists within the LIFELENZ Reports.
Shift Swap
When enabled, this will allow employees to swap their shift from a list of potential coworker's shifts that fit the following criteria:
Coworker is available during the swapped shift time
It will not list those who are unavailable
Have the same skill set as the shift they are swapping
Will only list those who can work the same position(s)
Will not allow minor breeches
It will not list minors who may incur compliance
Once the employee selects any number of potential swaps, the coworkers will be receive a notification indicating that a coworker wants to swap a shift with them. They can reject the offer, or they can accept. Accepting will then inform the original employee that someone is willing to swap, and at that time the original employee will then need to submit the swap to the manager.
Therefore there are 4 steps involved in a swap shift:
Employee (original) will select shifts to swap with coworkers
A coworker agrees to the swap and clicks accept
Employee (original) will then receive the accepted swap from their coworker and submit final swap request to manager
Manager will need to approve (or reject)
The swap shift will allow for other compliance situations such as overtime to be part of the shift list options, as the final approval sits with the manager. In the approval step, managers are informed of potential compliance (i.e. it will state 'Overtime') and can then make a decision.
Example: an employee needs to swap their closing shift due to family conflict and the only person available at that time to swap is someone who may then be in overtime. This being the only available person, you may want to approve the swap and incur the overtime to ensure a closer is working that evening.
This setting is available at both the Business Settings and Location Settings. Therefore, when enabled, the location setting can override this and disable the setting. In situations where a new manager may have been promoted and is getting accustomed, they may feel overwhelmed with swaps/drops and for a period of time this could be disabled.
If the setting is disabled at the Business Setting, it cannot be enabled from the Location Setting.
Shift Drop
When enabled, this will allow employees to drop their shift from a set period of time, as configured by the business. Although the employee may be able to 'drop their shift', the actual process they experience will inform them that the shift is still theirs, they are expected to work it and it will remain in their shift list until a manager approves the request.
When submitting a drop request, employees can select any number of coworkers to help find a replacement. They can select a single coworker, if they may have asked someone and there was a verbal agreement; a subset of coworkers; or they can select ALL coworkers. The list that is generated is based on whether the coworkers:
are available during that time
can work the position(s) listed in the shift
will not cause any minor breeches
Once selected, the coworkers will receive a notification and have the opportunity to pick up the shift, or reject the potential for more hours.
When the manager goes to approve a drop shift request, they will be presented with who is dropping the shift, when and what the shift is, as well as the 'potential replacements' who may have accepted to work the shift. Managers can also approve the drop shift without a replacement, to potentially save on some labor; or they can reject the drop shift altogether and expect the original employee to work their scheduled shift.
Only once a manager has approved (or rejected) the drop request will the shift be removed from the employee's shift list.
This setting is available at both the Business Settings and Location Settings. Therefore, when enabled, the location setting can override this and disable the setting. In situations where a new manager may have been promoted and is getting accustomed, they may feel overwhelmed with swaps/drops and for a period of time this could be disabled.
If the setting is disabled at the Business Setting, it cannot be enabled from the Location Setting.
Features in these release notes may not apply to all clients. Availability depends on your product version, subscription plan, and system configuration. Contact support for details.


