Skip to main content

Timekeeping Basics

Overview

A manager can track the actual work employees have completed. This is visible in two ways:

  1. In the Schedule, the time clock data, or a punch in/out, is represented as a solid line on top of the shift block.
    ​
    If time clock data is missing for the shift, such as when an employee was absent or did not show up for their shift, then the missed shift is shown as a dotted line.
    If an employee works longer than the scheduled shift, the timeclock data line will extend beyond the shift.
    ​

    NOTE: The Time clock display setting must be selected to see the timeclock data (punch in/outs).
    ​

  2. Access Timekeeping to see the timeclock data in further detail and to make edits.
    ​

ADD/EDIT TIME CLOCKING ENTRY

  1. In Timekeeping, select New Time Clock Entry in the upper-righthand corner (or double-click a cell in the table to add a time clock entry.)

  2. Enter the details (employee, date, time, break(s), etc.) and click Create. ​

  3. If a shift is associated with a scheduled shift, the scheduled hours will appear in a light gray font beneath the worked hours, which will appear in bold. A shift with no scheduled shift will only display the hours worked in bold.

  4. Any compliance warnings that apply to the shift will appear in the shift box with the warning indicator. You can also hover your mouse over the compliance indicator, and a pop-up will display the compliance warning.


​NOTE: Any new shifts, edited shifts, or deleted shifts will be sent a notification to the employee via the mobile app.
​

MARK AS ABSENT

  1. In Timekeeping, select the employee’s shift in the Time Clock panel

  2. Choose Mark as absent on the right

  3. Click OK in the pop-up confirmation box to confirm the change, or click Cancel to undo it. If OK is selected, a notification will be sent to the employee’s Mobile App.

After marking an employee absent, the shift will appear with diagonal lines throughout as an indication that the employee has been marked absent. The diagonal lines will be displayed in both Timekeeping and the Schedule.
​
​

Features in these release notes may not apply to all clients. Availability depends on your product version, subscription plan, and system configuration. Contact support for details.

Did this answer your question?